EN | FR
 

E915 Flange Flatness Measurement

Flange Flatness Measurements & Parallelism tool for Windmill Towers & Blades with a Spinning Laser

The Easy-Laser E915 Flange flatness measurement tool is primarily used for flange flatness and parallelism of wind mill towers but of course, can also be used to measure any application that needs to be flat or parallel. The Flange flatness measurement tool includes the Laser transmitter D23 Spin with a power rotating head. The laser beam from the transmitter rotates constantly and creates a reference plane over the entire measurement object. Measurements are performed quicker as you do not have to align the beam for each new Flange flatness measurement position. You place the detector at the desired Flange measurement points and register the reading by a push of a button. In principle, one person can perform the Flange flatness measurement themselves!

 

See the result as a true 3D image in the display unit directly after flange measurement. Then evaluate the result easily with different calculation settings, for example, three point reference, best fit or all positive. This can also be done directly on site without having to stop to go to a PC with separate analysis programs. This makes production much more efficient. It is then possible to generate a PDF report containing graphs and measurement data directly from the Flange flatness measurement tool’s display unit. All information about the measurement object is documented.

e915 system picture

We are Easy-Laser’s Canadian National Distributor

Resources

E915

Videos