Detectors & Receivers

Part No.: 12-0759

Diameter 45 mm [1.77″]. 2 axis PSD, 20×20 mm [0.79″x0.79″]. Built-in 360° electronic inclinometer. Built-in Bluetooth® wireless communication and rechargeable battery. There is also a connector on the back side for standard “red cable” (charging and data transfer). Mounting threads on both ends, for tube adapters (01-0777) or other suitable brackets (e.g. 12-0767 and 12-0553).

Note: Make sure you have a suitable bracket!

Part No.: 12-0752

Detector for the E-series. 2 axis PSD, 20×20 mm [0.79”x0.79”]. Built-in 360° electronic inclinometer. Two connectors for making it possible to connect two detectors or more in series. Normally mounted on rods, but has many additional mounting possibilities thanks to threads on two sides.

Notes: Optimized for fixed-point laser, does not detect a spinning laser.

Part No.: 12-0509

Detector for the E-series. 2 axis PSD, 20×20 mm [0.79”x0.79”]. Built-in 360° electronic inclinometer. Two connectors for making it possible to connect two detectors or more in series. Normally mounted on rods, but has many additional mounting possibilities thanks to threads on two sides.

Notes: With Dual Detection Technology, making it possible to read both fixed point laser and spinning laser, but is optimized for spinning laser.

Part No.: 12-0799

Detector for the E-series. 2 axis PSD, 30×30 mm [1.18”x1.18”]. Built-in 360° electronic inclinometer. Two connectors for making it possible to connect two detectors or more in series. Normally mounted on rods, but has many additional mounting possibilities thanks to threads on two sides.

Note: With Dual Detection Technology, making it possible to read both fixed point laser and spinning laser, but is optimized for spinning laser.

Laser transmitter D25 is used for measuring straightness primarily in turbine applications. Measurement distance of 40 m [130’]. The laser beam can be angled 90° to the sweep, within 0.01 mm/m [0.5 mils/INCH].

Note: Battery adaptor (not pictured) and offset hub included. Brackets/arms may also be needed, but are not included. See also 12-0594.

Part no:12-0022

Part No.: 12-0856

Includes roll bracket (12-0849), detector E2 (12-0845), digital level E290 (12-0846), adapter plate (12-0874), charger (03-0821), DC charging cable (12-0750), DC to USB adapter (12-0751), USB memory stick with documentation (03-0914).

Note: Delivered in plastic case (12-0871). As standard for roll diameters up to 400 mm. For larger roll diameters, please see Part No. 12-0885, Large Roll Kit.

Detector that reads off the sheaves position in two directions (horizontal + vertical) at the same time. With built-in display showing offset and angular values. Laser transmitter also needed. 4 Super magnets on back side for attachment to sheave.

Notes: Also for Bluetooth® wireless connection to separate display units E51 and E52 which have the BTA digital program (see XT190 BTA). Or connect it to the XT Alignment App on your iOS/Android display, or Easy-Laser XT11.

Part No.: 12-1054