Laser Transmitters

Laser transmitter D22 can be used to measure flatness, straightness, squareness and parallelism. The laser beam can sweep 360° with a measurement distance of up to 40 metres [130´] in radius. The laser beam can be angled 90° to the sweep, within 0.01 mm/m [0.01 mils/inch]

Part no:12-0022

Laser transmitter D23 has a motor driven, rotating head that gives a 360° laser plane. Because the laser beam sweeps across the surface you do not need to align the beam for every detector position. Tilt table included. Measurement distance up to 20 meters [65´] in radius.

Part no:12-0168

Laser transmitter D22 can be used for measuring spindle direction and straightness. Can be used in a rotating spindle (max. 2000 rpm). Measurement distance 20 meters [65’]. Mounting pin Ø20 mm [0.79”].

Part no:12-0022

Laser transmitter D75  is used for measuring straightness and spindle direction. M6 threads on ends and sides offer alternative mounting options. Measurement distance of 40 m [130’].

Part no:12-0075

Laser transmitter D25 is used for measuring straightness primarily in turbine applications. Measurement distance of 40 m [130’]. The laser beam can be angled 90° to the sweep, within 0.01 mm/m [0.5 mils/INCH].

Note: Battery adaptor (not pictured) and offset hub included. Brackets/arms may also be needed, but are not included. See also 12-0594.

Part no:12-0022

Laser transmitter D75  is used for measuring straightness and spindle direction. M6 threads on ends and sides offer alternative mounting options. Measurement distance of 40 m [130’].

Part no:12-0075

Laser transmitter E30 long range is used for measuring straightness on long distances. Measurement distance 100 m [328’] with a 20 mm PSD, >200 m [656’] with 30 mm PSD. M6 threads on front and bottom offer alternative mounting options. Built-in rechargeable battery and Oled display.

Note: Coordinate table or tilt table needed for accurate functionality. No charger or bracketing included (compare with Part No. 12-0858).

Part no: 12-0823

Laser transmitter E30 long range is used for measuring straightness on long distances. Measurement distance 100 m [328’] with a 20 mm PSD, >200 m [656’] with 30 mm PSD. M6 threads on front and bottom offer alternative mounting options. Built-in rechargeable battery and Oled display.

Note: Coordinate table or tilt table needed for accurate functionality. No charger or bracketing included (compare with Part No. 12-0858).

Part no: 12-0858

Laser transmitter producing a laser line parallel to the object it is mounted to.

Note: Only transmitter as pictured, no targets or detector included. (Complete systems, see the D90 or the XT190)

Part no: 12-0309