Measurement Features – E-Series

Below are all of the measurement features and descriptions available for the Easy-Laser E-Series line of measurement and alignment systems.

measurement_value_filterMeasurement Value Filter - An advanced electronic filter function can be used to achieve reliable results even under poor measuring conditions. For example, if you have air turbulence and vibrations from adjacent machines, increase your filter to get accurate measurement results.

multiple_sets_of_feetMachine Feet Configurations - The software can adjust to machine designs of all types: two pairs of feet, three pairs of feet, pair of feet in front of the coupling, etc.

swap_view_function2Swap View Function - The swap view function allows you to adjust the position of the motor on screen to correspond with the position of the machine in front of you, making it easier to understand adjustment directions.

thermal_growthThermal Growth Compensation - Oftentimes, machines expand considerably when moving from a cold to hot operating temperature. The Thermal Growth Compensation function allows the measurement system to calculate the correct shims and adjustment values needed to make adjustment in such cases. Compensation values for the machines are normally supplied by the manufacturers.

live_any_angleLive-Any-Angle 360° - Allows adjustment of the machines live with the measuring units positioned anywhere around the shaft. Good for when machine parts prevent normal adjuster positioning.

reference_foot_lockingReference Foot Locking - This function allows you to lock any pair of feet on the machine. This gives great freedom when aligning bolt-bound machines.

bearing_playCheck Bearing Play - All our measurement systems come with the extremely useful Values program. The program can be used e.g. when one wants to measure as with dial gauges and to check bearing play. With the standard equipment and completely normal set up on the machine!

Tolerance_checkTolerance Check - Checks the offset and angle values towards a selected tolerance. Shows graphically when the alignment is within tolerance.

Results/Repeatability Table - The result table shows how well your readings repeat and lets you save comments for each one.

Spread the love

Write a Comment

Your email address will not be published. Required fields are marked *